You can disassemble parts of your sewing machine to clean it or perform routine maintenance, such as changing the belt.

I am fairly sure that I can repair this, provided I can reach the inside. Now the indented disk will not stay flat, and the needle will not move. If the hook assembly is removable, take it out. If you’ve been having problems with your sewing machine handwheel, you’ll be feeling the peace of mind after checking out our post below. By forcing the hand wheel to turn, you could do further damage to your machine. Check to make sure that the upper tension is not tangled up. I've managed to get the screw out, but it … If thread has been wrapped around the hand wheel of your machine, follow the steps below to remove the thread. I have a Brother xl2600i sewing machine. Most old models of sewing machines if not all are designed with a knob inside the handwheel that may be locked, making it hard to turn the handwheel. Turn on the sewing machine. Grasp the needled plate cover, and slide it to the front of the machine. Now try to turn the hand wheel toward the front of the machine. The first you need to do is remove the bobbin and bobbin carrier. 4. You could probably obtain a book for your model of machine, usefull for keeping it oiled and tension adjusted right. The machine is in a bind and cannot turn freely. Remove the needle in the machine. 3. A little w-shaped spring popped out of my machine (serial number 57817C) for no apparent reason, though the machine is at least 12 years old.

Switch the machine to the symbol "O" position to turn the power off of your machine. Remove the bobbin case and clean any lint or thread that may be stuck or have built up in the machine using either a small brush or vacuum. You may need to remove the needle plate to remove dust around the bobbin case's exterior. When I do turn it, the needle goes up and down and seems to work okay.

Sewing machines have been existing for a long time and remain relevant to date regardless of the vast technological revolution. Follow these steps to loosen the hand wheel: 1.

Release the belt or drive from the hand wheel and try to turn the hand wheel. Turn hand wheel toward the back of the machine to break the machine loose from the tight spot. If there is tension when pulling the thread, then the thread may be unsuitable for machine sewing and should be replaced with machine sewing thread from a reputable brand. Like the Brother sewing machine if the handwheel doesn't move freely when the bobbin case is removed, then take it in for servicing.

Once this is complete check if the handwheel moves freely without the bobbin case. Follow these steps to loosen the hand wheel: 1. How do I remove or attach the presser foot ? Now try to turn the hand wheel toward the front of the machine. I have learned the hard way that those two details make the difference between a frustrating time getting very little done versus a delightful smooth session of sewing. What steps can a technician take to repair a locked up sewing machine? Once this is complete check if the handwheel moves freely without the bobbin case. Make sure the bobbin area is clear of debris and free of any binding parts.

By forcing the hand wheel to turn, you could do further damage to your machine. Brush away and remove any encrusted debris. When you attempt to turn the hand wheel, the locked up sewing machine hand wheel just wont turn or turns only under serious force.

Threading the upper thread Set the spool of thread on the spool pin, and then thread the machine. The pulley on the machine should turn freely. 6.

If it is loose, the problem is gunk in the bobbin assembly. Loosen the presser foot screw to remove the presser foot from the machine.

Remove the bobbin case and clean any lint or thread that may be stuck or have built up in the machine using either a small brush or vacuum.

It is vital for one to check this part and disengage it as it is done when threading the bobbin then turn the handwheel. The thread should pull through the machine freely with no tension. 2.